Data & Equipment.
BMW R nineT Racer.
The design and the ergonomics of the BMW R nineT Racer clearly show their purpose and origins: the search for the ideal line. If this is also your way of life and your throttle hand twitches upon hearing the word Isle of Man and Daytona, then the R nineT Racer will be right up you street. It enables you to enjoy the unmistakable sound of a powerful opposed-twin engine on a state-of-the-art bike. Find out about all the technical data and standard equipment here.
Technical data
Engine
Type
Air/oil-cooled, four-stroke twin-cylinder boxer engine, four radial valves per cylinder, double overhead camshaft, central balance shaft
Bore x stroke
101 mm x 73 mm
Capacity
1,170 cc
Nominal load capacity
110 hp (81 kW) at 7,750 rpm
Max. torque
116 Nm at 6,000 rpm
Compression ratio
12.0:1
Fuel/engine management
Electronic intake pipe fuel injection, electronic engine management with overrun cut-off, twin-spark ignition
Emission control
Regulated three-way catalytic converter, compliant with EU4 emission standard
Mileage / consumption
Maximum speed
Over 200 km/h
Consumption per 100 km based on the WMTC
5.3 l
Fuel type
Unleaded petrol, 95-98 octane (RON) (nominal load capacity with 98 octane (RON))
Electrical system
Alternator
720-W three-phase generator
Battery
12 V/14 Ah, maintenance-free
Transmission
Clutch
Hydraulically operated single-disc dry clutch
Gears
Six-speed helical synchromesh gearbox
Secondary drive
Shaft drive
Suspension / brakes
Frame
Three-section frame made up of front and two-section rear subframes, load-bearing engine/gearbox, pillion frame can be removed for solo riding
Front suspension / spring elements
Telescopic fork with 43-millimetre stanchion diameter
Rear suspension / spring elements
Cast aluminium single swing-arm with BMW Motorrad Paralever; central spring strut, spring preload via hook wrench can be adjusted infinitely, rebound stage damping adjustable
Spring travel, front/rear
125 mm / 120 mm
Wheelbase
1,491 mm
Castor
103.9 mm
Steering head angle
63.6°
Wheels
Spoke cast wheels
Rim dimensions, front
3.50 x 17"
Rim dimensions, rear
5.50 x 17”
Tyre, front
120/70 ZR 17
Tyre, rear
180/55 ZR 17
Brake, front
Twin disc brake, diameter 320 mm, 4-piston fixed calipers
Brake, rear
Single disc brake, diameter 265 mm, double-piston floating caliper
ABS
BMW Motorrad ABS
Dimensions / weights
Seat height, unladen
805 mm
Rider step length, unladen
1,785 mm (Custom front-seat (accessory): 1,775 mm)
Usable tank capacity
17 l
of which reserve
approx. 3.5 l
Length
2,105 mm
Height (including mirrors)
1,105 mm
Width (including mirrors)
920 mm
Unladen weight, fully fuelled/road-ready
219 kg
Max. permitted weight
430 kg
Max. load (with standard equipment)
210 kg
1) As defined in EU directive 93/93/EEC, filled with all operating fluids, fuelled to at least 90% of usable tank capacity
Standard equipment
Equipment
- Steel fuel tank, 17 l
- One-piece seat (seat height: 805 mm)
- Pillion passenger frame, rear seat and pillion foot pegs can also be fitted (see special accessories)
- One key system for ignition tank and steering
- Side stands with cut-out switch
- Brake lever and clutch lever adjustable – multiple settings
- On-board literature and tools
Special features
- BMW Motorrad ABS (switchable)
- Foot pegs
Electrical system
- Permanently illuminated lights and hazard warning lights system
- Multi-functional display on the tachometer
- Power socket
- CAN bus with Single Wire System (SWS)
- Electronic immobilizer
- Diagnostic interface
- 720-W generator
- White indicators and LED rear light
+ Read more